Відео

Where’s the exhaust mods for the 335i video?

Nice color z

Do yk if I am able to get MBRP Black series exhaust for my 2023 trd off-road Tacoma ??

Is AWE quiet mode about as loud as the stock loud mode in person? It kinda sounds this way in the video.

Worthless video

Do you have to drain the oil prior to this ?

*DO NOT TRY ON BRONCO RAPTOR* the VDM is in the way along with the studs for the module on the right rear

Had the AFE module for a 2.7 Bronco. Power seemed good but then the cross traffic alert would alarm. Shortly after that I would lose power and had to use the bypass module to run again. Sent unit back to AFE. Had to constantly contact them for updates. 3 to 4 weeks later, I finally got the unit back. It was worse than ever. They asked me to return it to them again saying they had rebuilt everything in it and wanted to check the harness to see if there was something wrong with it. I had sent it to them, at my expense, and now they wanted it again. They had the harness the first time I sent it to them. I decided to return it for a refund. Bought a JB4 and have had no problems.

Does this work on the 2024 Raptor?

I was about to pick up an frs. Last minute I changed my mind and got a 370z. No regrets

Decent info. Thanks for posting. A few comments and none meant to minimize the value you've provided in the content. You should have covered the replacement of the stock radiator and it's thermostat (and the preventive replacement of the electronic water pump). The stock radiator is plastic end capped and fails often, and its a weak link in the cooling of the N54. While you're mentioning that the mickey-mouse flange, the radiator top tube and the overflow container should be mentioned for preventive replacement. The oil cooler at the last minute should have been given a little more time to cover what's needed to adapt the cooler to the oil filter housing. Meth and DI are cool but nothing beats a better source of fuel, so a LPFP is nearly essential with 400+ HP builds.

Buck up

I need a 350z💔💔💔

They pronounce it Givi. Like Give-E 👍🏻

Does this fit a 2020 1500 custom trail boss? Thanks

Yeah I wish I would of watched this video instead of any others before installing my steps!! 🙄😉 awesome job!! 👌

Best cold air intake is boost.

how many mm is 1 full turn?

bullshit u didnt share the proces of installing and bleeding procceses...

i have a stock brz and i want a little more sound , is deleting the small second resonateur a good choice ? and what it will sound like ?

I thought this was gonna be a meaningful mod video but it was just a sales ad

Just FYI , the gen 2 manifolds have 9 stud holes as gen 1 have 8 ,noise usually happens when one of the manifold studs break ,99% of the time it will be the one closest to the firewall, had both mine replaced and no issues since, hope this helps , thanks

Did y'all by chance sell this mustang? I am buying one that has the exact same wheels, color, blacked out hood, and coilover set up. This one that I am buying does have a roush supercharger as well but just wanted to see if I might be buying this one haha

i think you need to check braptor vs bronco for the fuse layout they are different if its in your youtube i missed it

Is there a way to hardwire this kit? My obd ii plugin has shit out and won't work anymore, plus having it constantly plugged in is annoying and in the way.

just got my Z and its been a fun time already

155 lb ft wheel torque?

Any idea if the Smittybilt xrc 9500lb winch would fit? I’m mostly concerned about the solenoid as it seems to be about bigger than the one you mounted.

Does this tune kit remove the 100mph governor?

Thanks Motoroso for the video. I went with a nice combo for my brz. One of the best videos out there to inform. Then I went and listened to some videos of said exhaust.

They sold you the wrong Mid-Pipe Cat-Delete, the exhaust part mid-pipe must be longer and you got a shorter one, so you had to make an addition to fix the exhaust. But I see that even now they have the wrong on their site.

good day... i need help. i recently bought a h&r sway bar for a bmw e92 335i. however, I did not receive bushings on the front sway bar. I sent h&r instagram messages and their website, but no one answers for days. I also understood from the comments of other users that they don't respond to them either, which is terribly rude. does anyone know which bushings should go or where they can be obtained or some sort of part number. thank you.

Just ordered mine for my 19 sierra cant wait to install it

hi how about blitz suspension ?

Just got mine finally and I love it. It is such a cool vehicle.

can yall make a video about best mods for the mk4 jetta with the 1.8 turbo plz

So what do you do with the regular switches? Really wish someone would just aftermarket those so they can be labeled and light up like the spod.

Who isn't on a budget lol. If you've got an unlimited budget can you lend me some

Loose the music!!!!

Is the fitment for the racks the same for 2024?

for the 2020 gt500 do you need a different coilover?

Great instructions! Thank you. One thing that was clear at all was how to route the wire for the license plate light. Ligh how do you run the wire through the tire and still able to remove the tire

You lost me at remove the engine...

not gonna talk about the jackson racing c38?

Does it have noise on the soft top?

2016 Buick lacrosse?

Eu gostaria de comprar o servo buddy no Brazil . parabéns por postar o vídeo

Phenomenal video! Subbed!

Good video, well done. At 7:47 you say "tap the splined bolts...." to remove them. Looked really easy! For mine, I had to pound on them with a 4 lb. hammer for a while! What's the deal? Is my car messed up? I reused the hardware, for now, but ordered new bolts and nuts, and will replace them before any significant driving.

I am mainly looking for a rear bumper. Seen lots of cool front bumpers. But even for front bumpers I haven’t seen one that will work with me. I need sensor capability, with lights, able to hold a winch, not block the acc, ane either has a camera relocation mount or doesn’t block the camera with winch installed. There are not many front bumpers that will work. A few but not many, even for back bumpers I am having an issue finding one that will do the sensors, have places for a light, have recovery hooks and still have a place for the license plate without getting in the way. I have a spare tire cover cause the sun in Texas kills spare tires. So can’t mount a plate on my tire.